Whisperkool Ducted Split – Platinum Split 4000

  • Quiet and efficient operation
  • Standard and 24V thermostat options available
  • Condensing unit can be placed outdoors with purchase of exterior housing
  • Includes a pump system to remove access condensation
  • 55°F temperature differential between cellar and condensing unit air intake temperature

Manuals

Owner’s Manual

Owner’s Manual (24V thermostat conversion kit)

Technician’s Manual

Technician’s Manual (24V thermostat conversion kit)

Product Sheet

Platinum Split 4000 Product Sheet

Warranty Information

Full Warranty Information

Warranty Checklist

Additional information

Cellar Size

Approx. 1000 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit)

BTU/h w/85°F air entering condenser coil

3120

Dimensions

Evaporator: 20"L x 20.5”W x 15.5”H, condenser: 16.08”L x 16.23”W x 12.61"H

Refrigerant

R-134a

HP

1/3

Refrigeration Tons

0.26

Voltage Rating

Evaporator: 115V (15-amp dedicated circuit required), condenser: 115V (15-amp dedicated circuit required)

Weight

Evaporator: 60 lbs, Condenser: 60 lbs

Amps

Evaporator: 1 (running amps), compressor: LRA 43, RLA 8

Line Set

Liquid line 1/4"; Suction line 1/2" (less than 50 ft.), 5/8" (greater than 50 ft.)

Duct Size

8" Supply, 10" Return

Drain Line

1/2" ID clear plastic tubing (not provided)

Installation

Evaporator can be installed up to 25 duct feet away from cellar. Condensing unit can be installed up to 100 line feet from evaporator unit.

Thermostat

Advanced digital display (50- ft. cable), liquid-temperature-measuring bottle probe (50-ft. cable)

Temp. Delta

Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature

 

A ducted Platinum split system from WhisperKool is the most efficient way to cool a cellar.  Splitting the condenser and evaporator pieces allows the noise and heat to be dissipated to a better suited location away from the wine cellar.  The evaporator is quieter and can be placed in the wine cellar or outside the wine cellar and simply ducted into the cellar.

Aesthetically, a ducted Platinum split-system from WhisperKool is more pleasing by not having the equipment in the wine cellar.

Note: A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty.

BTU/H Rating

3120

 

The BTU/h value is an estimated number based on many variables.  A heat load calculation is needed to estimate the BTU/h value for your wine cellar.

To calculate your BTU/h, you will need the wine cellar dimensions, building materials used, such as glass, concrete, etc., physical and geographical location of your wine cellar and insulation value of the wine cellar.

Contact Summit Wine Cellars to have a heat load calculation done for your wine cellar.  203.916.1664.

Features

  • Quiet and efficient operation
  • Advanced electronic display
  • Liquid bottle probe
  • Alarm capabilities
  • Flexible installation
  • 55°F temperature differential
  • Condensing unit can be placed outdoors w/optional housing
  • Includes cold weather start kit
  • Pump down system for longer compressor life*

24V Thermostat Conversion Kit

Introducing our new 24-volt thermostat conversion kit for WhisperKOOL split systems!

Utilize industry-leading technology from major manufacturers to monitor the environment of your cellar. (See individual thermostat manufacturers’ websites for details.)

  • Connect your thermostat to Wi‑Fi to control the temperature from your phone, tablet or laptop.
  • Monitor run time and energy usage.
  • Set alarm notifications.
  • View your cellar conditions from your mobile device.

The use of the 24-volt thermostat conversion kit eliminates the thermostat normally included with the system and allows your contractor to select, purchase and install the thermostat technology of your choice, including but not limited to Nest, Ecobee, and Honeywell.

By selecting the 24V Thermostat Conversion Kit, you have acknowledged that the system will not be built with the standard WhisperKOOL control or liquid measuring bottle probe. You will have to source and purchase your own 24V thermostat to run the equipment.

  • Not utilizing the thermostat from WhisperKOOL also eliminates the use of the bottle probe.
  • WhisperKOOL does not provide smart thermostats. Those must be purchased separately.
  • WhisperKOOL customer service staff do not provide technical support for customers’ selected thermostats.
Schedule a Callback
close slider

    Request a Call Back and our team will get in touch with you ASAP.