Whisperkool Mini Ceiling Mount
- Offers excellent efficiency by drawing in the warmer air which accumulates at the ceiling, cooling and dispersing the air throughout the environment
- Standard and 24V thermostat options available
- No ducting required
- Allows for maximum racking space
- Includes a pump system to remove excess condensation
- Includes cold weather start kit
- The grille of the unit comes with a durable black powder-coated finish, which can be painted to match the cellar
Manuals
Owner’s Manual
Owner’s Manual (24V thermostat conversion kit)
Technician’s Manual (24V thermostat conversion kit)
Product Sheet
Mini Ceiling Mount product sheet
Warranty Information
Full Warranty Information
Warranty Checklist-Split Systems
Described in the simplest terms, a split system is a cooling unit wherein the evaporator unit and condensing unit have been “split” into two separate units instead of being contained within the same housing. The evaporator unit is located in or near your cellar, and the condensing unit is generally located outside, or in an attic or utility room.
The Platinum Series of split systems allow you to decide where the evaporator unit and the condensing unit will be located. The condensing unit can be located up to 100 ft. away from the evaporator unit. The evaporator unit will be mounted in the cellar or it can also be located nearby with ducting.
If you don’t mind seeing the grille of your cooling unit in your cellar, a wall-mounted split system is what you need. If you prefer your unit to be out of sight, you should get a fully ducted split system. The choice is yours.
Note: A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty.
Additional information
Cellar Size | Approx. 500 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier (each wine cellar is unique and has specific cooling requirements; heat load calculations should always be performed prior to selecting a cooling unit) |
---|---|
BTU/h w/85F air entering condenser coil | 1730 |
Dimensions | Evaporator: 22.05”L x 11.08”W x 11.34”H, condenser: 13.97”L x 15.85”W x 9.86"H |
Refrigerant | R-134a |
HP | 0.7 |
Voltage Rating | Evaporator: 115V (15-amp dedicated circuit required), condenser: 115V (15-amp dedicated circuit required) |
Weight | Evaporator: 40 lbs, condenser: 38.8 lbs |
Amps | Evaporator: 1 running amp (per unit), compressor: LRA 26, RLA 4.4 |
Line Set | Liquid line 1/4", suction line 3/8" (less than 50 ft.), 1/2" (greater than 50 ft.) |
Drain Line | 1/4” ID clear plastic tubing |
Installation | Evaporator is installed through the cellar ceiling. Condensing unit can be installed up to 100 line feet from evaporator unit. |
Thermostat | Advanced digital display (50-ft. cable), liquid-temperature-measuring bottle probe (retractable cable) |
Temp. Delta | Can maintain a 55°F cellar temperature with up to 110°F condenser air intake temperature |
The smallest of the ceiling mount series, the ductless mini split-system is designed for smaller environments. Maximize your wine racking environment by placing this mini ductless split-system wine cellar cooling unit in the ceiling. No ducts required, grill can be painted to match your wine cellar.
Note: A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty.
Reviews
There are no reviews yet.